NOTE: blade effect above will not have any effect on Blaster Blade and Ghost Blade modes. There are 3 blade modes: Standard Blade, Blaster Blade, and Ghost Blade.
Blade Mode: Press and hold the button for three flashes, then This will change the blade mode. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. Blade Effect: Press and hold the button for two flashes, then This will change the blade effect. There are 3 volume settings: Volume High, Volume Low, and Mute. Volume Control: Press and hold the button for one flash, then This will change the volume. While the blade is off, the following controls are activated based on the flash of the LED button: Turn off the Blade: Continue to hold the button past 2 flashes to turn off the blade. When the color you want shows, a quick press will end the color cycle. Change Blade Color: Press and hold the button for two flashes, then this will initiate the color cycle. Drag Effect: Press and hold the button for one flash, then This will initiate the drag effect. Blaster Deflect: A quick press will initiate a single blaster deflect. When the Blade is Lit, the following controls are activated based on the flash of the LED button: Press the button once, quickly, to ignite the blade. Press and hold the LED button to bring out of sleep you will hear a ‘Power On’ voice, and the LED button will turn on. Please contact our customer service team. Issue 4 - If any other problem occurs that the above methods won't fix Open the saber and carefully adjust the connectors so that the positive and negative both touch easily. 
The battery is not making contact properly with the plates inside. Issue 3 - When charging, saber cues 'charging' then immediately indicated 'ready' Removing and reinstalling the battery may fix it if the issue is not related to charge. Charge the battery for one hour, as this is likely a low battery issue. Issue 2 - Saber loses either red, blue or green color does not light up at all, or has no swing or clash sounds Turn off the saber, then hold the button for 0.5 seconds to change sound volume. Removable electronics kit, once screws got loose please use the given tool to tighten them. Please use 5V wall charger or devices with USB port to charge The saber has battery reverse connection, charging and discharging protection. Can connect 2 sabers directly into one double blades saber (coupler needed for some designs). Removable battery (if you remove the sabers main body). This saber has infinitely variable colors to choose from. Removable blade: use the provided tool to loosen the screws in the hilt. Ultra-loud sound volume and bright LED lights. Has flash-on-clash effect for realistic saber duels Strong enough for medium to heavy dueling. When the saber is in deep sleep there will be no lights or sounds available to save battery power. If the saber sits idle for 10 minutes it will also enter deep sleep again. Power Off - Hold the power button for 10 seconds to make the saber sleep. Choose Sound Fonts (9 sets available) – Hold the power button for 1.5 seconds, the Red LED around the power button will flash 3 times, while the blade is off, but still in wake mode,. LED Light Effects (Stable, Unstable, Pulse) – Hold the power button for 1 second, the Red LED around the power button will flash 2 times, while the blade is off, but still in wake mode. Select the Volume - Hold the power button for 0.5 seconds, the Red LED around the power button will flash 1 time, while the blade is off, but still in wake mode. When the blade is off, but the RED LED is lit, the power button operates in the following ways: Turn Off Blade Light - Hold the power button for 2 seconds, the Red LED will flash 4 times. Once a desired color is reached, tap it to set the color. 
Change Blade Color (Solid Colors)Hold the power button for 1.5 seconds, the Red LED will flash 3 times, then release to cycle through the solid blade colors.Once a desired color is reached, tap the power button again to set the color. Change Blade Color (Rainbow) – Hold the power button for 1 second, the Red LED will flash 2 times, then release to cycle through blade color spectrum (rainbow colors).Saber Lock-Up – Hold the power button for 0.5 seconds, Red LED will flash 1 time, then release.When the blade is lit, the power button operates in the following ways: Pressing the power button will turn the blade on and activate sounds and effects.A sound will play and the Red LED ring around the power button will illuminate. Hold down the power button for 1 second.
0 kommentar(er)
